How To Build A Quiet Laptop Computer Harddisk
When I got a new used notebook off a web based auction site, it didn't come with a hard drive. In my search for a laptop HD, I learned how to create hard disk originally from compact flash memory.
I got myself a bootable CF to 2" IDE Adapter. The following adapter enables you to work with a compact flash card as your primary hard disk drive.
This adapter connects on the 44-pin connector for most laptops. I have seen that several laptop connectors use a pin hole in the centre blocked, making the adapter not match. I just imagine you possibly can snip over pin or bend it back to the adapter and it should match, but I've not tried out it myself.
It is possible to boot on all operating-system from the CF card utilizing this adapter. I might suggest using Windows 98 as the operating-system. Windows XP creates too many read/write cycles that could limit living span of this memory. Windows XP requires no less than 3 GB to set up. Windows 98 just
requires around 256 MB to run.
It's achievable try Windows XP as the operating system. I would upgrading with a microdrive. However beware, setting up Windows XP the standard way, it will get stuck in a endless loop. There's key to get it to install in the right way, however , I have not have worked it yet. I imagine it will require data files transferred from the usual laptop hard drive.
The best benefit to implementing a CF card as a hard disk drive is that if your laptop becomes dropped, the memory is more likely to survive the fall than a typical disk drive.
The brand new small laptops use a same setup which is termed a Solid State Drive (SSD).
I use this adapter along with a 2 GB card for my notebook. It works effectively having Windows 98 and I've added in a Wi-Fi card to have Net accessibility.
|
